Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shiwaku, Hideaki; Marushita, Motoharu*
JAEA-Research 2022-015, 39 Pages, 2023/05
JAEA-Research-2022-015.pdf:2.74MB
We designed the hard X-ray undulator beamline BL22XU, which is dedicated to Japan Atomic Energy Research Institute (JAERI) at SPring-8 (now Japan Atomic Energy Agency (JAEA)). BL22XU is used for XAFS (X-ray Absorption Fine Structure) analysis experiments to develop separation and extraction materials for radioactive waste treatment and to elucidate their chemical behavior, magnetic research experiments using a diffractometer, and experiments under extreme conditions using a high-pressure press and a diamond anvil cell. The available X-ray energy range was set from 3 to 70 keV. To design the optics of the beamline, the reflectivity of the mirrors, the diffraction width of the monochromatic crystal, and the absorptance of the Be window were calculated. In addition, ray tracing was performed to optimize the materials for optics, dimensions, and location. The delay time of the ADL (Acoustic Delay Line) was also examined to ensure the safety in the use of radioactive materials. The operation of BL22XU "JAEA Actinide Science I" has already started. By collaborating BL22XU and BL23SU "JAEA Actinide Science II," which uses a soft X-ray undulator as a light source, we solve the problems to promote nuclear sciences. Since the monochromator was upgraded in 2018-2019, initial planning and measured data are documented here again.
Saha, P. K.; Okabe, Kota; Nakanoya, Takamitsu; Shobuda, Yoshihiro; Harada, Hiroyuki; Tamura, Fumihiko; Okita, Hidefumi; Yoshimoto, Masahiro; Hotchi, Hideaki*
Journal of Physics; Conference Series, 2420, p.012040_1 - 012040_7, 2023/01
Yee-Rendon, B.; Kondo, Yasuhiro; Tamura, Jun; Nakano, Keita; Maekawa, Fujio; Meigo, Shinichiro; Jameson, R. A.*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.499 - 502, 2023/01
The Japan Atomic Energy Agency (JAEA) is designing a 30-MW proton linear accelerator (linac) for the accelerator-driven subcritical system (ADS). The Radio Frequency Quadrupole (RFQ) is an essential component for the performance of high-intensity linac, especially in ADS, where stringent reliability is demanded. The present RFQ will capture a 20 mA proton beam and accelerate from the energy of 35 keV to 2.5 MeV, where the space-charge effects are severe. The present RFQ's design employs the equipartitioning (EP) beam scheme to control the emittance growth and compactness. As a result, the beam halo formation was minimized and allowed to optimize the superconducting linac downstream part. A remarkable feature of this RFQ is the low Kilpatrick factor of 1.2 adopted to achieve high stability by reducing the probability of surface sparking on the vane. This work presents and discusses the results of this RFQ design.
Maekawa, Fujio
JAEA-Conf 2022-001, p.7 - 13, 2022/11
The partitioning and transmutation (P-T) technology has promising potential for volume reduction and mitigation of degree of harmfulness of high-level radioactive waste. JAEA is developing the P-T technology combined with accelerator driven systems (ADS). One of critical issues affecting the feasibility of ADS is the proton beam window (PBW) which functions as a boundary between the accelerator and the sub-critical reactor core. The PBW is damaged by a high-intensity proton beam and spallation neutrons produced in the target, and also by flowing high-temperature liquid lead bismuth eutectic alloy which is corrosive to steel materials. To study the materials damage under the ADS environment, J-PARC is proposing a plan of proton irradiation facility which equips with a liquid lead-bismuth spallation target bombarded by a 400 MeV - 250 kW proton beam. The facility is also open for versatile purposes such as soft error testing of semi-conductor devises, RI production, materials irradiation for fission and fusion reactors, and so on. Application to nuclear data research with using the proton beam and spallation neutrons is also one of such versatile purposes, and we welcome unique ideas from the nuclear data community.
Mineo, Hideaki
Nihon Genshiryoku Gakkai-Shi ATOMO
, 64(11), p.617 - 621, 2022/11
In December 2016 Decisions were made by the Government on the Fast Breeder Prototype Reactor "Monju", which were decommissioning of the reactor and installation of a new research reactor at the Monju site. After the decisions, MEXT started research to list reactor candidates suitable for the site. Among the candidates, medium power reactor type of which thermal output less than 10,000 kW was chosen to utilize neutron beams. Then, from 2020, MEXT launched an entrusted business and adopted JAEA, Kyoto University and University of Fukui as the core institutions of the business to carry out the conceptual design. This paper describes the system to proceed the conceptual design and to examine the utilization management of the new research reactor and also shows their status.
Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count：6 Percentile：84.97(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Maekawa, Fujio; Takei, Hayanori
Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.206 - 210, 2022/05
In developing an accelerator-driven nuclear transmutation system (ADS), it is necessary to solve technical issues related to proton beams, such as the development of materials that can withstand high-intensity proton beams and the characterization of subcritical cores driven by proton beams. Therefore, at the high-intensity proton accelerator facility J-PARC, a transmutation experimental facility that actually conducts various tests using a high-intensity proton beam is being planned. This paper introduces the outline and future direction of the transmutation experimental facility.
Meigo, Shinichiro; Nakano, Keita; Iwamoto, Hiroki
Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.216 - 221, 2022/05
For the realization of accelerator-driven transmutation systems (ADS) and the construction of the ADS target test facility (TEF-T) at J-PARC, it is necessary to study the proton beam handling technology and neutronics for protons in the GeV energy region. Accordingly, the Nuclear Transmutation Division of J-PARC has studied these issues with using J-PARC's accelerator facilities, and so on. This paper introduces these topics.
Nakano, Keita; Iwamoto, Hiroki; Nishihara, Kenji; Meigo, Shinichiro; Sugawara, Takanori; Iwamoto, Yosuke; Takeshita, Hayato*; Maekawa, Fujio
JAEA-Research 2021-018, 41 Pages, 2022/03
JAEA-Research-2021-018.pdf:2.93MB
Neutronic analysis of beam window of the Accelerator-Driven System (ADS) proposed by Japan Atomic Energy Agency (JAEA) has been conducted using PHITS and DCHAIN-PHITS codes. We investigate gas production of hydrogen and helium isotopes in the beam window, displacement per atom of beam window material, and heat generation in the beam window. In addition, distributions of produced nuclides, heat density, and activity are derived. It was found that at the maximum 12500 appm H production, 1800 appm He production, and damage of 62.1 DPA occurred in the beam window by the ADS operation. On the other hand, the maximum heat generation in the beam window was 374 W/cm
. In the analysis of LBE, 
Bi and 
Po were found to be the dominant nuclides in decay heat and radioactivity. Furthermore, the heat generation in the LBE by the proton beam was maximum around 5 cm downstream of the beam window, which was 945 W/cm.
Yamamoto, Kazami; Hatakeyama, Shuichiro; Otsu, Satoru*; Matsumoto, Tetsuro*; Yoshimoto, Masahiro
Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.494 - 498, 2021/10
J-PARC 3 GeV Rapid Cycling Synchrotron (RCS) provides more than 700 kW proton beam to the neutron target. In order to investigate the influence of the radiation, we intend to evaluate the radiations such as the neutron and gamma-rays, which are generated due to the proton beam loss. If the amount of beam loss is excessive, it becomes difficult to identify the individual neutron and gamma ray. Therefore, we investigated the signal rate of the extraction point of RCS. Preliminary result indicated that we can enough distinguish the neutron and gamma-ray by the liquid scintillator.
Maekawa, Fujio
JPS Conference Proceedings (Internet), 33, p.011042_1 - 011042_6, 2021/03
Development of beam window (BW) materials is one of crucial issues in development of accelerator driven nuclear transmutation systems (ADS). The BW is exposed to high energy protons and spallation neutrons, and also to corrosive lead-bismuth eutectic (LBE) alloy at high temperature of about 500
C. Recently, not only high-power accelerators but also high-power targets are the rate-limiting factor for increasing the power of accelerator facilities in terms of radiation damage and heat removal. To study radiation damage on BW and target materials for high-power accelerator facilities including ADS, we are planning a materials irradiation facility by utilizing the proton beam of 400 MeV and 250 kW provided by the J-PARC's Linac. The target is flowing LBE alloy which is a candidate target and coolant material of ADS. When a steel sample is irradiated in the target for one year, the sample receives radiation damage of about 10 dpa at maximum which is equivalent to the yearly radiation damage of ADS's BW. In the current facility concept, the facility is equipped with a hot-laboratory for efficient post-irradiation examination. The facility will be outlined in this presentation.
Collaborative Laboratories for Advanced Decommissioning Science; Kyoto University*
JAEA-Review 2019-036, 65 Pages, 2020/03
JAEA-Review-2019-036.pdf:4.46MB
JAEA/CLADS, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Quantitative Analysis Method for Radiation Distribution in High Radiation Environment by Gamma-ray Image Spectroscopy". Electron-tracking Compton camera (ETCC) has been developed originally for nuclear gamma-ray astronomy, and also applied to medical use as a technology that greatly improves the resolution of conventional Compton camera by measuring three-dimensional tracking of electrons using a gaseous 3-dimensional position detector (so called Time Projection Chamber) in the first stage. In the present study, based on the ETCC that has been developed for medical use, we produce a prototype of light weight ETCC with the emphasis on the operability at the site, and evaluate its practicability by field tests.
Takada, Hiroshi; Haga, Katsuhiro
JPS Conference Proceedings (Internet), 28, p.081003_1 - 081003_7, 2020/02
At the Japan Proton Accelerator Research Complex (J-PARC), the pulsed spallation neutron source has been in operation with a redesigned mercury target vessel from October 2017 to July 2018, during which the operational beam power was restored to 500 kW and the operation with a 1-MW equivalent beam was demonstrated for one hour. The target vessel includes a gas-micro-bubbles injector and a 2-mm-wide narrow mercury flow channel at the front end as measures to suppress the cavitation damage. After the operating period, it was observed that the cavitation damage at the 3-mm-thick front end of the target vessel could be suppressed less than 17.5 
m.
-ray beamOmer, M.; Shizuma, Toshiyuki*; Hajima, Ryoichi*
Nuclear Instruments and Methods in Physics Research A, 951, p.162998_1 - 162998_6, 2020/01
Times Cited Count：1 Percentile：13.56(Instruments & Instrumentation)Partitioning and Transmutation Technology Division, Nuclear Science and Engineering Center
JAEA-Technology 2017-033, 383 Pages, 2018/02
JAEA-Technology-2017-033.pdf:28.16MB
JAEA is pursuing research and development (R&D) on volume reduction and mitigation of degree of harmfulness of high-level radioactive waste. Construction of Transmutation Experimental Facility (TEF) is under planning as one of the second phase facilities in the Japan Proton Accelerator Complex (J-PARC) program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). The TEF consists of two facilities: ADS Target Test Facility (TEF-T) and Transmutation Physics Experimental Facility (TEF-P). Development of spallation target technology and study on target materials are to be conducted in TEF-T with impinging a high intensity proton beam on a liquid lead-bismuth eutectic target. Whereas in TEF-P, by introducing a proton beam to minor actinide loaded cores, reactor physical properties of the cores are to be studied, and operation experiences of ADS are to be acquired. This report summarizes results of safety design for establishment permit of one of two TEF facilities, TEF-P.
Takada, Hiroshi; Haga, Katsuhiro; Teshigawara, Makoto; Aso, Tomokazu; Meigo, Shinichiro; Kogawa, Hiroyuki; Naoe, Takashi; Wakui, Takashi; Oi, Motoki; Harada, Masahide; et al.
Quantum Beam Science (Internet), 1(2), p.8_1 - 8_26, 2017/09
At the Japan Proton Accelerator Research Complex (J-PARC), a pulsed spallation neutron source provides neutrons with high intensity and narrow pulse width to promote researches on a variety of science in the Materials and life science experimental facility. It was designed to be driven by the proton beam with an energy of 3 GeV, a power of 1 MW at a repetition rate of 25 Hz, that is world's highest power level. A mercury target and three types of liquid para-hydrogen moderators are core components of the spallation neutron source. It is still on the way towards the goal to accomplish the operation with a 1 MW proton beam. In this paper, distinctive features of the target-moderator-reflector system of the pulsed spallation neutron source are reviewed.
Maekawa, Fujio; Sasa, Toshinobu
Enerugi Rebyu, 37(9), p.15 - 18, 2017/08
Accelerator driven nuclear transmutation systems (ADS) are under development for reducing nuclear waste. The J-PARC Transmutation Experimental Facility program and situation of the world for the ADS development are introduced.
Nuclear Transmutation Division, J-PARC Center
JAEA-Technology 2017-003, 539 Pages, 2017/03
JAEA-Technology-2017-003.pdf:59.1MB
JAEA is pursuing R&D on volume reduction and mitigation of degree of harmfulness of high-level radioactive waste based on the "Strategic Energy Plan" issued in April 2014. Construction of Transmutation Experimental Facility is under planning as one of the second phase facilities in the J-PARC program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). The TEF consists of two facilities: ADS Target Test Facility (TEF-T) and Transmutation Physics Experimental Facility (TEF-P). Development of spallation target technology and study on target materials are to be conducted in TEF-T with impinging a high intensity proton beam on a lead-bismuth eutectic target. Whereas in TEF-P, by introducing a proton beam to minor actinide loaded subcritical cores, physical properties of the cores are to be studied, and operation experiences are to be acquired. This report summarizes results of technical design for construction of one of two TEF facilities, TEF-T.
NoLopez-Martens, A.*; Henning, G.*; Khoo, T. L.*; Seweryniak, D.*; Alcorta, M.*; Asai, Masato; Back, B. B.*; Bertone, P. F.*; Boilley, D.*; Carpenter, M. P.*; et al.
EPJ Web of Conferences, 131, p.03001_1 - 03001_6, 2016/12
Times Cited Count：1 Percentile：43.94(Chemistry, Inorganic & Nuclear)Fission barrier height and its angular-momentum dependence have been measured for the first time in the nucleus with the atomic number greater than 100. The entry distribution method, which can determine the excitation energy at which fission starts to dominate the decay process, was applied to No. The fission barrier of No was found to be 6.6 MeV at zero spin, indicating that the No is strongly stabilized by the nuclear shell effects.
Iwamoto, Hiroki; Nishihara, Kenji; Iwamoto, Yosuke; Hashimoto, Shintaro; Matsuda, Norihiro; Sato, Tatsuhiko; Harada, Masahide; Maekawa, Fujio
Journal of Nuclear Science and Technology, 53(10), p.1585 - 1594, 2016/10
Times Cited Count：18 Percentile：85.7(Nuclear Science & Technology)